Відео

thanks! I need to remove the rear one to replace it and it has those same clips

Thief steal my chrome calander of my car 208

Hi, how do you replace the long plastic strips that sit under and above the window?

Thanks, helpful video. Removing the glovebox allowed me to completely remove the filter access flap which eased fitting the replacement filter.

Question...will this defy stem works upside down?

Dmr is the solution for cutting steerer tube to short

My T6 (66) tailgate stopped opening. I'd already bought a new actuator after reading a bunch of threads on T6 forums. When I took the thing apart everything was wet. I dried everything off and fitted the new actuator and then I was able to open the tailgate. However, since then its stopped opening again. This made me suspect its the water, as the day I replaced the actuator was the hottest and dryest day of the year! Since then we've had loads more rain and I used the pressure washer 🙄. I'll take it all apart again and check the handle seals.

I will try it at the weekend.😊

Great video really well explained - some are a pain to change - especially as they don’t just slide in without squeezing them up together - stupid idea Vauxhall 😮 I’m changing one tomorrow on a vivaro ..

I need that on my D2 as the hood is usually open...LOL

Thank you 🙏

Qual o tamanho destas rodas 🛞? 18 5x100 ???

Thanks for the best Video I found in You Tube to remove the front grille Chrom stripes ,without removing the complete frontbumper. Sorry if my english ist not corect I am from Germany living nearby Cologne.👍👍

Jet washing the tailgate is a good reason water gets in past the seals.

The water getting to the tailgate release handle will knacker the release switch in time and you will be unable to open the tailgate. The way to release the tailgate is to remove the round plug at the base of door and tripping the latch with a finger.

Great video. Thanks for posting.

I have a 2006 T5 4motion crew cab kombi factory job. The metal plate which is sandwiched between the runner base and the bottom covered is completely rusted and separated from the main window. Can this be purchased. Thanks

Hi. I have a t6.1 that has this same issue. It’s a slightly different window mechanism but how did you get the window out to do this repair please?

Sir can you send me more photos how to convert. What parts needed? I have also 125 scooter engine. Can i copy your idea please.

Which trim tool set did you buy? Any links?

VW legendary build quality???????

Love the video How did you get on with the van many problems ?🤔 Very smart looking van by the way 🔥

Can you explain please how you removed the tailgate door card?

Justo lo que necesito para aumentar la altura de mi manillar

Nice one! Cheers!

Have you got measurements? Please

I just bought the Dmr Sect stem,it's very similar, 40mm reach with a 27mm stack height, perfect for my short ass rockshox steerer tube 👍💯

👍👍👏👏🍀🍀

Really helpful - I've done the same fix on my T5 following your guide. Good that you shared your thinking about how to do the fix too, making the argument for it. Many thanks for posting.

Helped loads!! I've bought some raceface six C 35mm carbon bars. These look ideal for my hardtail as prefer bar rise for jumps 💯cheers dude

My 17 plate T6 tailgate was filling with rainwater also. Clear silicone around the brake light & handle completely dry 😀👍🏻

Great Job! Practical and Good Loonkig...

Is this really 15mm rise? The product description says 5mm.

Thank you, I should be picking up my vivaro next week , Im going to sikaflex that plate , the next day...

Watsap

Can you add links to parts here please links in description not working

Thanks for this video and clarifying the difference. I've bought an orbea rise in XL (I'm 6ft 4). If you put my dropper post to the height I need it, the bars are so much lower that the seat height it's unreal. I've just purchased today some one-up carbon e-bar with a 35mm rise. I was searching for a stem, found this one on Google and looked for a video, yours popped up first. This combined with the one-up bars will be perfect. As it is, I look like I'm on a road Racer being that low down at the front 🤣

Very helpful, Im considering the DMR for a higher rise. Im currently using the Race face. Great explanation!!!!

My bottom rail had become detached at the back end. Can anyone recommend a particular bonding type that should be used to fix it back to the glass? I will also need to carry out the leak fix once the rail is bonded to the glass

I'll buy the dmr35 if you don't use it 🇬🇧🙏🤟,just noticed this is 3 year's old lmno 🤣😆

You helped a lot, thanks 👍🏼

excellent work mate!

How fast?

Hi mate, I know it's an old video but I have the same problem with my van. Would you be so kind to tell where did you get that engine cover from? I'm on about the one that stops the water from leaking into the head.

This whole isue just got a lot worse - a T6 Kombi had it's slider window fall out due to corrosion behind the slider bottom rail caused by the known leak problem . The rusting [ which is hidden from view ] causes the botton slider rail to sag / drop and the slider window falls out . A very serious safety issue with catastrophic implications .

Just bought a 2017 Renault lwb sport version 🤘😎🤘

🤘😎🤘

Have you had anymore leaks since?

Why did you remove the glovebox? mine came out without removing any panels, this is not correct advice. Watch this instead: ua-cam.com/video/-tJhRNmHXig/v-deo.html

But what if you put the defy stem down where the raceface stem sits? Then is it 5mm?